Maintenance sprays are ideal for cleaning and protecting most electrical equipment. Other applications include the lubrication of small or inaccessible components such as locks or hinges, the loosening of rust scale before wire brushing, and as a damp-start for many applications. A multipurpose rust preventative, lubricant and dewatering aerosol provides an ultra-thin anti-corrosion protective film.
Relative Density | yea |
Brand | Castrol |
Usage/Application | Automotive |
Grade | Defined |
Vehicle Type | Heavy Vehicle |
Packaging Type | Drum |
Color | Pale Yellow, Red, Light Fawn |
Grade | a |
Usage/Application | industrial |
Unit Pack Size | normal |
Packaging Type | normal |
Color | white |
Brand | Castrol |
DESCRIPTION: |
Gentle foaming action. Long lasting chain lubricant for use on food processing equipment where incidental food contact may occur. highly resistant to water off. The gentlefoam assures an excellent penetration and non dripping action. Good load carrying capabilities and corrosion prevention. Blend of synthetic lubricants and mineral oil to keep roller drive and conveyor chains lubricated. Penetrates, lubricates and protects moving parts by reducing friction and wear. NSF H1 rated for incidental food contact. |
FEATURES: |
|
APPLICATION: |
Lubricant for general and food processing industries.
|
Usage/Application | Industrial |
Form | Liquid |
Grade | Cleaning |
Feature | NOn conductive |
Type | CRC Lectra clean |
Purpose | Cleaning |
Uses
*Your information is safe with us.
GENERAL DESCRIPTION:
Graphite lacquer is used for conductive coatings. Thermoplastic binder with electrically conductive graphite powder.
FEATURES:
GRAPHIT 33 contains a high level of pure and fine graphite powder. This results in a good electrical conductivity, as well as gliding and release agent properties of the graphite lacquer. The coating exhibits good adhesion on metal, many plastics, glass and wood.
APPLICATIONS:
As a conductive coating for permanent and safe diverting of electrostatic discharges (ESD)
• Backs of cathode ray tubes
• Electroplating of non-conductive materials
• ESD safe packages
• Repair of graphite-coated PCBs in keyboard switches (e.g. remote controls)
• To firm the ESD protection of packaging and conveyor tube equipment.
As sliding coating for permanent, temperature resistant, dry sliding coating.
As high-temperature release agent: conductive protective release coating for high-voltage contacts, high-temperature release agent, e.g. for moulds used for the sintering of abrasive agents in abrasive discs.
Optical applications: the dark black colour makes GRAPHIT 33 suitable as an absorbent coating in for example laser applications.
DIRECTIONS:
When relative small amounts are involved, the easiest way to apply GRAPHIT 33 is to spray from an aerosol can. Shake can thoroughly before use. Spray, from a distance of 20-30 cm onto the dry and degreased surface. After use, always clean button by spraying upside-down until only gas escapes. When larger amounts are needed, GRAPHIT 33 can be applied by spraying using commercial spray guns. Before use, stir vigorously (best for 10 minutes with propeller agitator). During use, shake or stir at regular intervals. The surface resistivity can be further reduced by heating at 90°C (1 hour) or by polishing with a cloth or swab. Polishing makes also the weak graphite layer more firm. At temperatures above 100°C the binding agent will decompose. Never the less a good adhering graphite film remains that can be used as e.g. release coating
Features
*Your information is safe with us.